COLOR TOP FLEX:

  • Waterproof coating for vertical walls forming part of the PRB COLOR COLOR TOPFLEX waterproofing system, to seal substrates with cracks p to 30/10 mm wide, using a non-typical technique.
  • Its appearance after application and drying is velvet mat.
  • It has fungicide and anti-cryptogamic properties

COMPOSITION

  • Cross-linkable acrylic copolymer
  • Titanium dioxide
  • Calcium carbonate
  • Special additives
  • Water

APPLICATION

SUBSTRATE PREPARATION

  • Color Top Flex paint must be applied to plane, dry, clean, sound and solid substrates with no powdering or traces of form oil.
  • Substrates degraded by moss or other greenery should be treated using the Actidemousse product (see Technical Datasheet).
  • Do not apply to ferrous metals without first preparing the substrate and applying an anti-corrosion layer.
  • For made up concrete (Planimur), allow to dry for at least 1 month before applying Color Top Flex paint.
  • Top edges of vertical surfaces and all surfaces that could be degraded (metallic surfaces, wood, glass, etc.) must be protected.
  • In the case of large areas, surfaces to be coated should be broken down into panels so that the product can be applied over the entire panel without interruption, to avoid the risk of reworking the surface during application.

 

  

 
HOME | ABOUT US | GALLERY | KEY BENEFITS | CONTACT US | ORDER ONLINE | CREPIFOND F & G | CREPIMUR SOUPLE | MARBRO MURO | COLOR TOP FLEX | SUPER BRUT | TRADICLAIR PR | STUCCO CIRO | COL FLEX | ACCROFOND I | ACTIDEMOUSSE F HP

copyright 2007 Minerva Inc.