ACTIDEMOUSSE:

Ready-to-use liquid which cleans by destroying moss, greening, lichens, funqi, etc.  It also protects facades, roofing, and flooring against future attacks (stains).

Exists in three versions:

-ACTIDEMOUSSE soley for cleaning

-ACTIDEMOUSSE FLASH for rapid cleaning

-ACTIDEMOUSSE H.P. for cleaning and prevention.

PROPERTIES

ACTIDEMOUSSE, ACTIDEMOUSSE FLASH, and ACTIDEMOUSSE H.P. are three efficient, rapidly acting and easy-to-use products.  They enable materials to be brought back to their original appearance and then to keep that appearance.

COMPOSITION

An aqueous dispersion of quaternary ammonium salts and specific additives.  The product contains neither acids nor sulphates.

USAGE

Substrates:

• Facades: rendering, stones, marble, plastic coatings, paint, ceramic coverings, etc.
• Roofs: tiles, slates, asbestos-cement, etc.
• Floors: slabs, concrete, etc.
• Other possibilities

Note: It is recommended that the Actidemousse liquid should be sprayed before applying an organic product such as paint, etc., for preventive purposes, to prevent scaling and blistering.

APPLICATION

• Application may be made by brush or wool roller, or by spraying (low pressure spray gun).
• Maximum saturation of the substrate.
• Wait at least 1 to 2 days, depending on the weather conditions, before applying a new coating.  

There are two different procedures depending on the condition of the substrate:

• When the substrate is only slightly contaminated, apply Actidemousse HP after initial high pressure cleaning and drying of the facade or the gable; Actidemousse HP will then have a preventive action to protect the substrate from future aggression.
• However, if the substrate is severely contaminated, brush or spray Actidemousse (remedial) and then wait for at least 3 weeks before thorough cleaning with high pressure water accompanied by brushing to eliminate destroyed moss and lichens. then let it dry and make another preventive application of Actidemousse HP.

copyright 2007 Minerva Inc.